Polishing tv and computer mould wiring method: First, when wiring, the ground wire can not be connected wrongly (usually facing the left and right of the socket and grounding on the right fire, otherwise the electrical equipment will be plugged in, and it will trip as soon as it is turned on. In addition, the power socket has What are the ways to connect?

The wiring method of polishing tv and computer mould is as follows:

1. Use a test pen to find the front.

2. Turn off the power socket.

3. Connect the front to one of the 2 holes of the switch, and then connect a 2.5MM2 insulated wire from the other hole to the L hole of the 3 holes of the socket below, and connect it firmly.

4. Find out that the neutral wire is directly connected to the N hole of the 3 holes of the socket and connect it firmly.

polishing tv and computer mould https://www.tangrammould.com/TV-and-Computer-Socket-Mould.html